Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
75.891673mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Source Selector Switch |
Resistance |
1.3Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Applications |
Handheld/Mobile Devices |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
568mW |
Voltage - Supply |
2.7V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TPS2105 |
Pin Count |
8 |
Number of Outputs |
1 |
Max Output Current |
500mA |
Operating Supply Voltage |
5.5V |
Power Supplies |
3/5V |
Number of Channels |
2 |
Current - Output (Max) |
500mA 100mA |
Output Current |
500mA |
Max Supply Current |
35μA |
Turn On Delay Time |
340 μs |
Current - Supply |
18μA |
Min Input Voltage |
2.7V |
FET Type |
N and P-Channel |
Number of Inputs |
2 |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
6 μs |
Ratio - Input:Output |
2:1 |
Internal Switch(s) |
Yes |
Current - Output 2 |
100mA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2105D Overview
The case that it comes in is called 8-SOIC (0.154, 3.90mm Width) case. It is suited to pack the part in Tube case. Part Surface Mount is mounted. A voltage of 2.7V~5.5V is applied to it. It is essential that the minimal operating temperature of this component is not -40°C~85°C. The component connected to Handheld/Mobile Devices is a good match for this component. Source Selector Switch represents the device category. There is a N and P-Channel type of FET. Among the options available for the part are 8 terminations. Pins are positioned on 8 axes. The part is based on TPS2105. 5V provides its performance. This part's peak reflow temperature is utilized to run 260. Using 18μA to run part supply current. It is a part from the Power Management Circuits family. The part has 8 pins. The voltage at 3/5V can be delivered by it. There are 1 outputs available. A chip can work when its output current drops below 500mA 100mA. An input voltage of more than 5.5V V can be used with the chip. Low input voltages of less than 2.7V volts will not damage the chip. Under 500mA output current, the part can be delivered. The component can be delivered a current of 500mA as an output. Using 5.5V as the supply voltage, this device can be operated. In order for the part to run, it has 2 inputs. As long as the device resistance stays within the range of 1.3Ohm, the device is safe to use.
TPS2105D Features
in a 8-SOIC (0.154, 3.90mm Width) case
FET Type: N and P-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2105D Applications
There are a lot of Texas Instruments TPS2105D Ideal Diode controller applications.
- Factory automation and control - PLC digital output modules
- Automotive ADAS systems - camera
- Electricity meters
- USB HUBs
- Digital Cameras
- ADAS domain controller
- Asset tracker
- Power Tools
- Industrial motor drives
- Active ORing for redundant power supplies