TPS2105DBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | Source Selector Switch |
| Resistance | 250mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 309mW |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2105 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 18μA |
| Current - Output (Max) | 500mA 100mA |
| Output Current | 500mA |
| Max Supply Current | 18μA |
| Min Input Voltage | 2.7V |
| FET Type | N and P-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2105DBVTG4 Overview
The case comes in SC-74A, SOT-753 shape. As a result, it is suitable for packing the part in the Tape & Reel (TR) case. Mounting is done along the Surface Mount-axis. With 2.7V~5.5V as its voltage, it is given a temperature of 0°C. It is not allowed for this component to operate below -40°C~85°C degrees. It is fitting for the component connected in Handheld/Mobile Devices. A Source Selector Switch device is categorized as such. There is a N and P-Channel type of FET. In this part, there are 5 terminations. The device is designed with 5 pins. TPS2105 underpins the part. In order to deliver its performance, it is powered by 5V. Run 260 using this part's peak reflow temperature. As far as I know, the part belongs to the Power Management Circuits family. In this part, there are 5 pins. It uses a current of 18μA for powering its operation. There are 1 outputs available. The part should be mounted by Surface Mount. It is possible for the chip to function when the output current conducts under the 500mA 100mA axis. Using the chip over 5.5V volts is allowed. It is possible to use this chip with an input voltage below 2.7V volts. It is possible to deliver the part under a 500mA output current. The component can be delivered a current of 500mA as an output. It is possible to operate this device with a supply voltage of 5.5V. A 2 input is required to run the part. Keeping the device resistance within 250mOhm is recommended.
TPS2105DBVTG4 Features
in a SC-74A, SOT-753 case
FET Type: N and P-Channel
5 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2105DBVTG4 Applications
There are a lot of Texas Instruments TPS2105DBVTG4 Ideal Diode controller applications.
- Modems
- Electricity meters
- AC Rectifier
- Active ORing for redundant power
- Factory automation and control - PLC digital output modules
- Head Unit
- Power Tools
- Automotive ADAS systems - camera
- Electronic point of sale
- Active OR-ing of Redundant (N+1) Power Supplies
