TPS2110APW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2110 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 750mA |
| Delay Time - ON | 500μs |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2110APW Overview
A 8-TSSOP (0.173, 4.40mm Width) case is included. As a result, it is suitable for packing the part in the Tube case. Part Surface Mount is mounted. With 2.8V~5.5V as its voltage, it is given a temperature of 0°C. This component's minimum operating temperature must not be -40°C~85°C. The component connected to Handheld/Mobile Devices is a good match for this component. It is classified as a Source Selector Switch device by the manufacturer. N-Channel is the type of FET. In this part, there are 8 terminations. 8 pins are used in the design. TPS2110 underpins the part. To deliver its performance, it's powered by the 2.8V platform. To run 260, we utilize the part's peak reflow temperature. This part is part of the Power Management Circuits family of parts. In this part, there are 8 pins. 55μA is the supply current that is used for the operation of the device. If 0.09mA is greater than 0, the supply current (Isup) should conduct. There are 1 outputs. Chips can be used with input voltages of more than 5.5V volts. Low input voltages of less than 2.8V volts will not damage the chip. The part can be delivered under 750mA output current. The output current that can be delivered to the component is 750mA. It is possible to operate this device with a supply voltage of 5.5V. In order to run the part, it needs 2 inputs.
TPS2110APW Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2110APW Applications
There are a lot of Texas Instruments TPS2110APW Ideal Diode controller applications.
- Motor drives
- Digital Cameras
- Industrial transport
- Active ORing for redundant power
- Industrial motor drives
- Automotive infotainment systems - head unit,telematics control unit
- Electronic point of sale
- AC Rectifier
- PDAs
- Building automation
