TPS2110APWG4
| Parameters | |
|---|---|
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 55μA |
| Current - Output | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Min Input Voltage | 2.8V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Current - Output 2 | 750mA |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS2110APWG4 Overview
The case is TSSOP-shaped. A 8 termination is available on the part. In this case, 8 pins have been used to design it. In order to deliver its performance, it is powered by 2.8V. This part's peak reflow temperature is utilized to run 260. There is a part of the Power Management Circuits family that is used in this part. Among the pins on the part are 8 pins. A supply current of 55μA is used to operate the device when it is in operation. It should be possible to conduct the supply current (Isup) under 0.09mA. A 1 output is available on the board. Chips can be used with input voltages of more than 5.5V volts. There are certain situations in which the chip can be used with input voltages as low as 2.8V V. The part can be delivered under 750mA output current. It is possible to operate this device with a supply voltage of 5.5V. This part has a 2 input that allows it to run. The part should be used when the temperature above -40°C. In the case of lower temperatures than 85°C, the part should be used.
TPS2110APWG4 Features
in a TSSOP case
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2110APWG4 Applications
There are a lot of Texas Instruments TPS2110APWG4 Ideal Diode controller applications.
- Building automation
- PDAs
- Automotive ADAS systems - camera
- Industrial motor drives
- Automotive infotainment systems - head unit,telematics control unit
- Active OR-ing of Redundant (N+1) Power Supplies
- Automotive battery protection
- Alternator
- Digital Cameras
- Modems
