TPS2110APWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2110 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Current - Supply | 55μA |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 750mA |
| Delay Time - OFF | 3ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2110APWR Overview
This item comes in a 8-TSSOP (0.173, 4.40mm Width) case. Tape & Reel (TR) cases are suitable for packing the part. I would like to point out that the part is mounted in the way of Surface Mount. We give it a voltage of 2.8V~5.5V. This component's minimum operating temperature must not be -40°C~85°C. The component connected to Handheld/Mobile Devices is a good match for this component. Device Source Selector Switch belongs to the Source Selector Switch category. Among all the types of FETs, there is a type which is known as N-Channel, which can be recognized by its graphical representation. Among the options available for the part are 8 terminations. The device is designed with 8 pins. The part is based on TPS2110. Powered by 2.8V, it delivers high performance. To run 260, we use the peak reflow temperature of this part. There is a requirement that the supply current be run for the part at 55μA in order to complete the operation. It is a part from the Power Management Circuits family. This part contains 8 pins that are located on the surface. A supply current (Isup) should be conducted under the condition 0.09mA. There are 1 outputs available. If the input voltage is greater than 5.5VV, this chip is capable of being used. With an input voltage less than 2.8V volts, it is possible to use the chip. Delivery of the part is possible under 750mA output current. This component can deliver 750mA output currents. The device can be operated with a voltage supply of 5.5V on the supply line. In order to make the part run, there are 2 inputs. A maximum output voltage of 6V is achieved by it. 120mOhm should be used for determining the device resistance.
TPS2110APWR Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2110APWR Applications
There are a lot of Texas Instruments TPS2110APWR Ideal Diode controller applications.
- Automotive ADAS systems - camera
- Modems
- Building automation
- Active OR-ing of Redundant (N+1) Power Supplies
- Cell phones
- Active ORing for redundant power supplies
- PCs
- Electronic point of sale
- Motor drives
- AC Rectifier
