TPS2110PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2110 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 750mA |
| Delay Time - ON | 500μs |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2110PWR Overview
A 8-TSSOP (0.173, 4.40mm Width) case is included with it. It is suited to pack the part in Tape & Reel (TR) case. Surface Mount is used to mount the part. It is given a voltage of 2.8V~5.5V. There must not be a minimum operating temperature of -40°C~85°C for this component. It is designed to fit the component that is connected in Handheld/Mobile Devices position. Source Selector Switch represents the device category. There is a N-Channel type of FET. The part is available with 8 terminations as an option. There are 8 pins on it. TPS2110 is the basis for the part. It is powered by 2.8V to deliver its perfomance. Run 260 using this part's peak reflow temperature. The part is from Power Management Circuits family. As you can see, the part is equipped with 8 pins. In order to operate it, 55μA is used as the supply current. The supply current (Isup) should conduct under 0.09mA. In addition, there are 1 outputs available for use. An input voltage over 5.5V V can be used with this chip. It is possible to use this chip with an input voltage below 2.8V volts. The part can be delivered under 750mA output current. As a result, 750mA is the maximum output current that can be delivered to the component. With a supply voltage of 5.5V, this device can operate. A 2 input is required to run the part.
TPS2110PWR Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2110PWR Applications
There are a lot of Texas Instruments TPS2110PWR Ideal Diode controller applications.
- Modems
- PDAs
- Camera ECU
- Asset tracker
- Cell phones
- Automotive infotainment systems - head unit,telematics control unit
- ADAS domain controller
- Industrial motor drives
- Motor drives
- Head Unit
