TPS2110PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2110 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 750mA |
| Delay Time - ON | 500μs |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2110PWRG4 Overview
A 8-TSSOP (0.173, 4.40mm Width) case is included with it. Parts should be packed in Tape & Reel (TR) cases. In this case, the part is mounted in the Surface Mount direction. It is given a voltage of 2.8V~5.5V. It must not be possible for this component to operate at -40°C~85°C°C as its minimum operating temperature. A component connected in Handheld/Mobile Devices would be a good fit for it. As a Source Selector Switch-type device, it is categorized. A N-Channel-type FET can be identified. There are 8 terminations available in the part. Pins are positioned on 8 axes. The part is based on TPS2110. The performance of this device is powered by 2.8V. A maximum reflow temperature of this part is used if 260 is to be run. Part of the Power Management Circuits family. This part contains 8 pins that are located on the surface. 55μA is the supply current that is used for the operation of the device. Current supplies (Isup) should run under 0.09mA. Outputs with 1 are available. It is possible to use the chip with voltages greater than 5.5V volts. There are only a few chips on the market that can be used with an input voltage lower than 2.8V volts. Deliveries can be made under 750mA output current. 750mA is the output current that can be delivered to the component in terms of its output voltage. The device can be operated with a voltage supply of 5.5V on the supply line. In order to run the part, it needs 2 inputs.
TPS2110PWRG4 Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2110PWRG4 Applications
There are a lot of Texas Instruments TPS2110PWRG4 Ideal Diode controller applications.
- Electricity meters
- Modems
- MP3 Players
- Automotive USB hubs
- Automotive infotainment systems - head unit,telematics control unit
- Industrial transport
- Digital Radios
- Power Tools
- Automotive battery protection
- Industrial motor drives
