TPS2111APWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2111 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Output Current | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - ON | 1ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2111APWRG4 Overview
It comes in 8-TSSOP (0.173, 4.40mm Width) case. Packing the part in Tape & Reel (TR) cases is ideal. In this case, the part is mounted in the direction of Surface Mount. The voltage is set to 2.8V~5.5V. It is not allowed for this component to operate below -40°C~85°C degrees. The component connected to Handheld/Mobile Devices is a good match for this component. As far as the device classification is concerned, it falls under the Source Selector Switch category. There is a N-Channel type of FET. Among the options available for the part are 8 terminations. There are 8 pins on the board and it is designed with them. TPS2111 is the basis for the part. Powered by 2.8V, it delivers high performance. As part of the 260 process, the peak reflow temperature of this part is utilized. As far as I know, the part belongs to the Power Management Circuits family. Several 8 pins are incorporated into the part. 55μA is the supply current that is used for the operation of the device. Current supply (Isup) must conduct under 0.09mA. There are 1 outputs available. It can work with voltages greater than 5.5VV as an input voltage. A voltage less than 2.8VV can be used to drive the chip. It is possible to deliver the part under a 1.25A output current. The output current that can be delivered to the component is 1.25A. It is possible to operate this device with a supply voltage of 5.5V. The part has 2 inputs to run.
TPS2111APWRG4 Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2111APWRG4 Applications
There are a lot of Texas Instruments TPS2111APWRG4 Ideal Diode controller applications.
- Power Tools
- USB HUBs
- Power supply reverse polarity protection
- Camera ECU
- PDAs
- Automotive battery protection
- Industrial transport
- Active ORing for redundant power
- Active OR-ing of Redundant (N+1) Power Supplies
- Electronic point of sale
