Parameters |
Max Output Current |
1.25A |
Operating Supply Voltage |
5.5V |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
2 |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Operating Supply Current |
55μA |
Power Dissipation |
3.87mW |
Current - Output |
1.25A |
Adjustable Threshold |
YES |
Turn On Delay Time |
1 ms |
Voltage - Output |
6V |
Min Input Voltage |
2.8V |
Number of Inputs |
2 |
Max Input Voltage |
5.5V |
Supply Current-Max (Isup) |
0.09mA |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
5 ms |
Current - Output 2 |
1.25A |
Height |
1.15mm |
Length |
3mm |
Width |
4.4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Package / Case |
TSSOP |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
39.008944mg |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
84mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.8V |
Terminal Pitch |
0.65mm |
Pin Count |
8 |
Number of Outputs |
1 |
TPS2111PWG4 Overview
The case is made of TSSOP plastic. The part is available with 8 terminations as an option. 8 pins are used in the design of this product. Powered by 2.8V, it delivers high performance. For 260, the peak reflow temperature of this part is used. It is a part from the Power Management Circuits family. In this part, there are 8 pins. This device is powered by 55μA, which is the supply current it uses to operate. If 0.09mA is greater than 0, the supply current (Isup) should conduct. A 1 output is available on the board. It is possible to use this chip with an input voltage that exceeds 5.5V volts. Input voltages less than 2.8V Volts are suitable for this chip, as long as the voltage input is not excessive. It is possible to deliver the part with a 1.25A output current. It is possible for this device to operate when the supply voltage is 5.5V. In order to run the part, it needs 2 inputs. If the temperature exceeds -40°C, the part should not be used. In the case of lower temperatures than 85°C, the part should be used. The device resistance should stay within the range of 84mOhm.
TPS2111PWG4 Features
in a TSSOP case
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2111PWG4 Applications
There are a lot of Texas Instruments TPS2111PWG4 Ideal Diode controller applications.
- USB HUBs
- PCs
- Automotive battery protection
- Industrial transport
- AC Rectifier
- Motor drives
- PDAs
- Head Unit
- Power Tools
- Electricity meters