Parameters |
Package / Case |
TSSOP |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
39.008944mg |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.8V |
Terminal Pitch |
0.65mm |
Pin Count |
8 |
Number of Outputs |
1 |
Max Output Current |
1.25A |
Operating Supply Voltage |
5.5V |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
2 |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Operating Supply Current |
55μA |
Current - Output |
1.25A |
Adjustable Threshold |
YES |
Turn On Delay Time |
1 ms |
Min Input Voltage |
2.8V |
Number of Inputs |
2 |
Max Input Voltage |
5.5V |
Supply Current-Max (Isup) |
0.09mA |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
5 ms |
Current - Output 2 |
1.25A |
Length |
4.4mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
TPS2111PWRG4 Overview
There is a TSSOP case that comes with it. In Tape & Reel (TR) cases, it is convenient to pack the part. In this part, there are 8 terminations. There are 8 pins on the board and it is designed with them. Performance is delivered by 2.8V. In order to run 260, a part's peak reflow temperature is utilized. The part is from Power Management Circuits family. This part contains 8 pins that are located on the surface. In order for it to operate, it uses a supply current called 55μA. In order to conduct under 0.09mA, the supply current (Isup) should be conducted. In this case, 1 outputs are available. Using the chip over 5.5V volts is allowed. A voltage less than 2.8VV can be used to drive the chip. Under 1.25A output current, the part can be delivered. With a supply voltage of 5.5V, this device can operate. For this part to run, 2 inputs are required. As soon as the temperature rises above -40°C, the part should be used. In the case of lower temperatures than 85°C, the part should be used.
TPS2111PWRG4 Features
in a TSSOP case
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2111PWRG4 Applications
There are a lot of Texas Instruments TPS2111PWRG4 Ideal Diode controller applications.
- Head Unit
- AC Rectifier
- Electricity meters
- Power Tools
- Industrial transport
- PDAs
- Industrial motor drives
- Electronic point of sale
- Automotive battery protection
- MP3 Players