Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
39.008944mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Source Selector Switch |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Applications |
Handheld/Mobile Devices |
Subcategory |
Power Management Circuits |
Voltage - Supply |
2.8V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.8V |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS2112 |
Pin Count |
8 |
Number of Outputs |
1 |
Max Output Current |
750mA |
Operating Supply Voltage |
5.5V |
Number of Channels |
2 |
Operating Supply Current |
55μA |
Output Current |
750mA |
Adjustable Threshold |
YES |
Turn On Delay Time |
500 μs |
Min Input Voltage |
2.8V |
FET Type |
N-Channel |
Number of Inputs |
2 |
Max Input Voltage |
5.5V |
Supply Current-Max (Isup) |
0.09mA |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
3 ms |
Ratio - Input:Output |
2:1 |
Internal Switch(s) |
Yes |
Current - Output 2 |
750mA |
Delay Time - ON |
500μs |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2112APW Overview
This item comes in a 8-TSSOP (0.173, 4.40mm Width) case. In this case, it is suitable to pack the part in a Tube case. In this case, the part is mounted in the Surface Mount direction. We give it a voltage of 2.8V~5.5V. A minimum operating temperature of -40°C~85°C must not be reached by this component. It fits the Handheld/Mobile Devices-connected component. Device Source Selector Switch belongs to the Source Selector Switch category. There is a N-Channel type of FET. The part is available with 8 terminations as an option. There are 8 pins on it. Using TPS2112 as a basis, the part is constructed. 2.8V provides its performance. In order to run 260, a part's peak reflow temperature is utilized. The part is from Power Management Circuits family. It is a part that has 8 pins in it. A supply current of 55μA is used to operate the device when it is in operation. It should be possible to conduct the supply current (Isup) under 0.09mA. There are 1 outputs available. If the input voltage is greater than 5.5VV, this chip is capable of being used. With an input voltage less than 2.8V volts, it is possible to use the chip. Under 750mA output current, the part can be delivered. As a result of this, 750mA is the maximum output current that is capable of being delivered to the component. There is no problem operating this device with a supply voltage of 5.5V. Run-by-2 inputs are provided on the part.
TPS2112APW Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2112APW Applications
There are a lot of Texas Instruments TPS2112APW Ideal Diode controller applications.
- Power supply reverse polarity protection
- Active ORing for redundant power
- Active OR-ing of Redundant (N+1) Power Supplies
- Electricity meters
- Electronic point of sale
- Automotive USB hubs
- Power Tools
- Camera ECU
- ADAS domain controller
- Cell phones