banner_page

TPS2112PW

TPS2112PW datasheet pdf and PMIC - OR Controllers, Ideal Diodes product details from Texas Instruments stock available at Noco


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2112PW
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 646
  • Description: TPS2112PW datasheet pdf and PMIC - OR Controllers, Ideal Diodes product details from Texas Instruments stock available at Noco(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 8
Weight 39.008944mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Source Selector Switch
Resistance 120mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Applications Handheld/Mobile Devices
Subcategory Power Management Circuits
Max Power Dissipation 386.84mW
Voltage - Supply 2.8V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.8V
Terminal Pitch 0.65mm
Base Part Number TPS2112
Pin Count 8
Number of Outputs 1
Output Voltage 6V
Max Output Current 750mA
Operating Supply Voltage 5.5V
Number of Channels 2
Operating Supply Current 55μA
Output Current 750mA
Max Supply Current 1μA
Adjustable Threshold YES
Turn On Delay Time 500 μs
Min Input Voltage 2.8V
FET Type N-Channel
Number of Inputs 2
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Turn-Off Delay Time 3 ms
Ratio - Input:Output 2:1
Internal Switch(s) Yes
Current - Output 2 750mA
Delay Time - ON 500μs
Height 1.2mm
Length 3mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2112PW Overview


The case is made of 8-TSSOP (0.173, 4.40mm Width) plastic. In Tube cases, it is convenient to pack the part. I would like to point out that the part is mounted in the way of Surface Mount. There is a voltage of 2.8V~5.5V applied to it. It is not acceptable to operate this component below -40°C~85°C degrees Celsius. It fits the Handheld/Mobile Devices-connected component. The device is categorized as Source Selector Switch. Among all the types of FETs, there is a type which is known as N-Channel, which can be recognized by its graphical representation. In the part there are 8 terminations that are available. As you can see, it is designed with 8 pins. TPS2112 underpins the part. Powered by 2.8V, it delivers high performance. As part of the 260 process, the peak reflow temperature of this part is utilized. Part of the Power Management Circuits family. In the part, you will find 8 pins. In order to operate it, 55μA is used as the supply current. 1 outputs are available in the system. This chip can be used with an input voltage of more than 5.5V volts without any problems. There are only a few chips on the market that can be used with an input voltage lower than 2.8V volts. The part can be delivered under 750mA output current. This component can deliver 750mA output currents. It can be operated at 5.5V supply voltage. Run-by-2 inputs are provided on the part. This device's maximum output voltage is 6V. Within the 120mOhm range, the device resistance should be maintained.

TPS2112PW Features


in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs

TPS2112PW Applications


There are a lot of Texas Instruments TPS2112PW Ideal Diode controller applications.

  • USB HUBs
  • Cell phones
  • Electronic point of sale
  • Building automation
  • Digital Cameras
  • Alternator
  • Motor drives
  • Automotive ADAS systems - camera
  • Asset tracker
  • Reverse Polarity Protection

Write a review

Note: HTML is not translated!
    Bad           Good