TPS2112PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2112 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 750mA |
| Delay Time - ON | 500μs |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2112PWR Overview
A 8-TSSOP (0.173, 4.40mm Width) case is included with it. A Tape & Reel (TR) case is a good choice for packing the part. Mounting is done along the Surface Mount-axis. A voltage of 2.8V~5.5V is applied to it. It is not allowed for this component to operate below -40°C~85°C degrees. The component connected in Handheld/Mobile Devices is suitable for this component. Device Source Selector Switch belongs to the Source Selector Switch category. Among all the types of FETs, there is a type which is known as N-Channel, which can be recognized by its graphical representation. In the part there are 8 terminations that are available. Pins are attached to it using 8 pins. Based on TPS2112, this part is manufactured. To deliver its performance, it's powered by the 2.8V platform. Run 260 using this part's peak reflow temperature. It is part of the Power Management Circuits family. In the part, you will find 8 pins. In order to operate it, 55μA is used as the supply current. A supply current (Isup) should be conducted under the condition 0.09mA. A 1 output is available on the board. This chip can be used with an input voltage of more than 5.5V volts without any problems. There are certain situations in which the chip can be used with input voltages as low as 2.8V V. The part can be delivered under 750mA output current. 750mA is the output current that can be delivered to the component in terms of its output voltage. It is possible to operate this device with a supply voltage of 5.5V. Runs on 2 inputs.
TPS2112PWR Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2112PWR Applications
There are a lot of Texas Instruments TPS2112PWR Ideal Diode controller applications.
- MP3 Players
- Camera ECU
- Electricity meters
- Industrial transport
- Active OR-ing of Redundant (N+1) Power Supplies
- Power Tools
- Active ORing for redundant power
- Head Unit
- Motor drives
- ADAS domain controller
