TPS2113APW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 84mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 387mW |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2113 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Output Current | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - ON | 1ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2113APW Overview
The case that it comes in is called 8-TSSOP (0.173, 4.40mm Width) case. In Tube cases, it is convenient to pack the part. Part Surface Mount is mounted. There is a voltage of 2.8V~5.5V applied to it. There must not be a minimum operating temperature of -40°C~85°C for this component. The component connected in Handheld/Mobile Devices is suitable for this component. As a Source Selector Switch-type device, it is categorized. A N-Channel-type FET can be identified. The part is available with 8 terminations as an option. Pins are attached to it using 8 pins. As you can see, this part is based on TPS2113. This device is powered by 2.8V in order to deliver a high level of performance. For 260, the peak reflow temperature of this part is used. A Power Management Circuits family part is involved in the project. This part contains 8 pins that are located on the surface. A supply current of 55μA is used to operate the device when it is in operation. The supply current (Isup) should conduct under 0.09mA. There are 1 outputs. This chip can be used with an input voltage of more than 5.5V volts without any problems. There are only a few chips on the market that can be used with an input voltage lower than 2.8V volts. The part is capable of being delivered under 1.25A output current. The component can receive an output current of 1.25A. Using 5.5V as the supply voltage, this device can be operated. In order to run the part, it needs 2 inputs. The device resistance should stay within the range of 84mOhm.
TPS2113APW Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2113APW Applications
There are a lot of Texas Instruments TPS2113APW Ideal Diode controller applications.
- Active ORing for redundant power supplies
- Automotive USB hubs
- Building automation
- Active ORing for redundant power
- Camera ECU
- PCs
- Automotive ADAS systems - camera
- Active OR-ing of Redundant (N+1) Power Supplies
- ADAS domain controller
- MP3 Players
