TPS2113APWG4
| Parameters | |
|---|---|
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 55μA |
| Current - Output | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Min Input Voltage | 2.8V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 ms |
| Current - Output 2 | 1.25A |
| Height | 1.15mm |
| Length | 3mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
TPS2113APWG4 Overview
There is a TSSOP case that comes with it. The part comes with 8 terminations. 8 pins are used in the design of this product. 2.8V provides its performance. A maximum reflow temperature of this part is used if 260 is to be run. Part of the Power Management Circuits family. This part contains 8 pins that are located on the surface. For the operation of this device, an electric current of 55μA is used as the supply current. Isup (supply current) should conduct under 0.09mA. In addition, there are 1 outputs available for use. Chips can be used with input voltages of more than 5.5V volts. There are only a few chips on the market that can be used with an input voltage lower than 2.8V volts. Parts can be delivered with 1.25A output current. It is possible for this device to operate at a voltage of 5.5V. This part has a 2 input that allows it to run. If the temperature exceeds -40°C, use the part. When the temperature is below 85°C, the part should be used.
TPS2113APWG4 Features
in a TSSOP case
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2113APWG4 Applications
There are a lot of Texas Instruments TPS2113APWG4 Ideal Diode controller applications.
- Digital Radios
- Motor drives
- Electricity meters
- Building automation
- Factory automation and control - PLC digital output modules
- Asset tracker
- Active OR-ing of Redundant (N+1) Power Supplies
- Automotive USB hubs
- PCs
- Industrial motor drives
