TPS2113APWRG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2113 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Output Current | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Current - Supply | 55μA |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - OFF | 5ms |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2113APWRG4 Overview
The case that it comes in is called 8-TSSOP (0.173, 4.40mm Width) case. As a result, it is suitable for packing the part in the Tape & Reel (TR) case. The part is mounted in the way of Surface Mount. We give it a voltage of 2.8V~5.5V in order to test it. It is essential that the minimal operating temperature of this component is not -40°C~85°C. It is suitable for the component connected in Handheld/Mobile Devices. There is a Source Selector Switch classification for the device. There is a N-Channel type of FET. There are 8 terminations available in the part. Pins are attached to it using 8 pins. Using TPS2113 as a basis, the part is constructed. It is powered by 2.8V to deliver its perfomance. To run 260, we use the peak reflow temperature of this part. The purpose of this is to run the supply current for the part at 55μA in order to run it correctly. A part from the Power Management Circuits family is what we are talking about. It is a part that has 8 pins in it. In order to conduct under 0.09mA, the supply current (Isup) should be conducted. There are 1 outputs available. Using the chip over 5.5V volts is allowed. A voltage less than 2.8VV can be used to drive the chip. Under 1.25A output current, the part can be delivered. As a result of this, 1.25A is the maximum output current that is capable of being delivered to the component. It is possible for this device to operate at a voltage of 5.5V. This part has a 2 input that allows it to run.
TPS2113APWRG4 Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2113APWRG4 Applications
There are a lot of Texas Instruments TPS2113APWRG4 Ideal Diode controller applications.
- PDAs
- Camera ECU
- Alternator
- Reverse Polarity Protection
- Industrial motor drives
- Motor drives
- Electronic point of sale
- Industrial transport
- Active ORing for redundant power
- Modems
