banner_page

TPS2113PW

TPS2113PW datasheet pdf and PMIC - OR Controllers, Ideal Diodes product details from Texas Instruments stock available at Noco


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2113PW
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 248
  • Description: TPS2113PW datasheet pdf and PMIC - OR Controllers, Ideal Diodes product details from Texas Instruments stock available at Noco(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 8
Weight 39.008944mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Source Selector Switch
Resistance 84mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Applications Handheld/Mobile Devices
Subcategory Power Management Circuits
Max Power Dissipation 386.84mW
Voltage - Supply 2.8V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.8V
Terminal Pitch 0.65mm
Base Part Number TPS2113
Pin Count 8
Number of Outputs 1
Output Voltage 6V
Max Output Current 1.25A
Operating Supply Voltage 5.5V
Number of Channels 2
Output Current 1.25A
Max Supply Current 1.5A
Adjustable Threshold YES
Turn On Delay Time 1 ms
Current - Supply 55μA
Min Input Voltage 2.8V
FET Type N-Channel
Number of Inputs 2
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Turn-Off Delay Time 5 ms
Ratio - Input:Output 2:1
Internal Switch(s) Yes
Current - Output 2 1.25A
Drain to Source Resistance 84mOhm
Delay Time - ON 1ms
Height 1.2mm
Length 3mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2113PW Overview


This item comes in a 8-TSSOP (0.173, 4.40mm Width) case. A Tube case is a good choice for packing the part. There is a Surface Mount-axis mounted on the part. There is a voltage of 2.8V~5.5V applied to it. In order for this component to operate correctly, its minimum operating temperature must not be -40°C~85°C. It is fitting for the component connected in Handheld/Mobile Devices. A Source Selector Switch device is categorized as such. In the case of FETs, N-Channel is recognized as the type. The part comes with 8 terminations. In this case, 8 pins have been used to design it. TPS2113 is the base of this part. The performance of this device is powered by 2.8V. To run 260, we utilize the part's peak reflow temperature. It is necessary to run the supply current at 55μA for the part. It is part of the Power Management Circuits family. In the part, you will find 8 pins. There are outputs that can be connected to 1. The chip can be used with an input voltage of more than 5.5V V. The chip can be used with an input voltage of less than 2.8V V. Parts can be delivered with 1.25A output current. The component can be delivered a current of 1.25A as an output. It is possible for this device to operate when the supply voltage is 5.5V. For this part to run, 2 inputs are required. This device's maximum output voltage is 6V. 84mOhm should be used for determining the device resistance.

TPS2113PW Features


in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs

TPS2113PW Applications


There are a lot of Texas Instruments TPS2113PW Ideal Diode controller applications.

  • Industrial motor drives
  • Asset tracker
  • USB HUBs
  • Power supply reverse polarity protection
  • Reverse Polarity Protection
  • Digital Radios
  • Active ORing for redundant power
  • Alternator
  • PCs
  • Cell phones

Write a review

Note: HTML is not translated!
    Bad           Good