TPS2113PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2113 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Output Current | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Current - Supply | 55μA |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - OFF | 5ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2113PWR Overview
The case is made of 8-TSSOP (0.173, 4.40mm Width) plastic. As a result, it is suitable for packing the part in the Tape & Reel (TR) case. In this case, the part is mounted in the Surface Mount direction. With 2.8V~5.5V as its voltage, it is given a temperature of 0°C. This component's minimum operating temperature must not be -40°C~85°C. A component connected in Handheld/Mobile Devices would be a good fit for it. It is classified as a Source Selector Switch device by the manufacturer. It is possible to recognize the FET type as N-Channel. In the part there are 8 terminations that are available. It is designed with 8 pins. Based on TPS2113, this part is manufactured. The performance of this device is powered by 2.8V. To run 260, we utilize the part's peak reflow temperature. There is a requirement that the supply current be run for the part at 55μA in order to complete the operation. A part from the Power Management Circuits family is what we are talking about. There are 8 pins in the part. Isup (supply current) should conduct under 0.09mA. In addition, there are 1 outputs available for use. It can work with voltages greater than 5.5VV as an input voltage. Input voltages less than 2.8V Volts are suitable for this chip, as long as the voltage input is not excessive. Parts can be delivered with 1.25A output current. The output current that can be delivered to the component is 1.25A. When supplied with a voltage of 5.5V, this device will function. Run-by-2 inputs are provided on the part.
TPS2113PWR Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2113PWR Applications
There are a lot of Texas Instruments TPS2113PWR Ideal Diode controller applications.
- Head Unit
- Industrial motor drives
- Automotive infotainment systems - head unit,telematics control unit
- ADAS domain controller
- Active OR-ing of Redundant (N+1) Power Supplies
- Automotive USB hubs
- Automotive ADAS systems - camera
- MP3 Players
- AC Rectifier
- Building automation
