TPS2114APWG4
| Parameters | |
|---|---|
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 40.001177mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 55μA |
| Current - Output | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Min Input Voltage | 2.8V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Current - Output 2 | 750mA |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS2114APWG4 Overview
The case comes with it. A 8 termination is available on the part. There are 8 pins on the board and it is designed with them. The performance of this device is powered by 2.8V. To run 260, we use the peak reflow temperature of this part. A Power Management Circuits family part is involved in the project. It is a part that has 8 pins in it. 55μA is the supply current that is used for the operation of the device. A supply current (Isup) should be conducted under the condition 0.09mA. There are outputs that can be connected to 1. If the input voltage is greater than 5.5VV, this chip is capable of being used. It is possible to use the chip if the input voltage is less than 2.8V Volts. This part is capable of being delivered with an output current of 750mA. In order for this device to function, it requires a supply voltage of 5.5V. For this part to run, 2 inputs are required. As soon as the temperature rises above -40°C, the part should be used. You should use temperatures below 85°C for this part.
TPS2114APWG4 Features
in a TSSOP case
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2114APWG4 Applications
There are a lot of Texas Instruments TPS2114APWG4 Ideal Diode controller applications.
- ADAS domain controller
- Active OR-ing of Redundant (N+1) Power Supplies
- Reverse Polarity Protection
- Asset tracker
- Electricity meters
- Automotive USB hubs
- Head Unit
- Power supply reverse polarity protection
- USB HUBs
- Cell phones
