TPS2114PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2114 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 750mA |
| Delay Time - ON | 500μs |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2114PW Overview
The case that it comes in is called 8-TSSOP (0.173, 4.40mm Width) case. It is suited to pack the part in Tube case. There is a Surface Mount-axis mounted on the part. We give it a voltage of 2.8V~5.5V in order to test it. This component's minimum operating temperature must not be -40°C~85°C. A component connected in Handheld/Mobile Devices would be a good fit for it. As a Source Selector Switch-type device, it is categorized. A type of FET known as N-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. The part comes with 8 terminations. 8 pins are used in the design. Using TPS2114 as a basis, the part is constructed. It is powered by 2.8V to deliver its perfomance. This part's peak reflow temperature is utilized to run 260. A part from the Power Management Circuits family is what we are talking about. It is important to note that the part has 8 pins. The supply current used for its operating is 55μA. It should be possible to conduct the supply current (Isup) under 0.09mA. There are outputs that can be connected to 1. An input voltage over 5.5V V can be used with this chip. The chip can be used with an input voltage of less than 2.8V V. It is possible to deliver the part with a 750mA output current. There is a specific output current that can be delivered to the component, which is called 750mA. The device can be operated with a voltage supply of 5.5V on the supply line. The part has 2 inputs to run. A maximum output voltage of 6V can be obtained from this device.
TPS2114PW Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2114PW Applications
There are a lot of Texas Instruments TPS2114PW Ideal Diode controller applications.
- Digital Radios
- Digital Cameras
- PCs
- Industrial transport
- Alternator
- AC Rectifier
- Industrial motor drives
- Electronic point of sale
- Asset tracker
- USB HUBs
