TPS2114PWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2114 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 750mA |
| Delay Time - ON | 500μs |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2114PWG4 Overview
This item comes in a 8-TSSOP (0.173, 4.40mm Width) case. In Tube cases, it is convenient to pack the part. There are two ways in which this part is mounted. We give it a voltage of 2.8V~5.5V. It is not acceptable to operate this component below -40°C~85°C degrees Celsius. There is a perfect fit between it and the component connected in Handheld/Mobile Devices. Source Selector Switch represents the device category. A type of FET known as N-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. The part comes with 8 terminations. The device is designed with 8 pins. TPS2114 is the basis for the part. 2.8V provides its performance. Run 260 using this part's peak reflow temperature. A Power Management Circuits family part is involved in the project. It is important to note that the part has 8 pins. In order for it to operate, a supply current of 55μA is used. The supply current (Isup) should conduct under 0.09mA. 1 outputs are available in the system. An input voltage of more than 5.5V V can be used with the chip. With an input voltage less than 2.8V V, the chip can be used. In terms of output current, the part can be delivered under 750mA output current. As a result of this, 750mA is the maximum output current that is capable of being delivered to the component. It is possible for this device to operate at a voltage of 5.5V. Runs on 2 inputs.
TPS2114PWG4 Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2114PWG4 Applications
There are a lot of Texas Instruments TPS2114PWG4 Ideal Diode controller applications.
- Power Tools
- Power supply reverse polarity protection
- Digital Radios
- Industrial motor drives
- Automotive infotainment systems - head unit,telematics control unit
- AC Rectifier
- Building automation
- ADAS domain controller
- Alternator
- USB HUBs
