TPS2114PWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2114 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Delay Time - ON | 500μs |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2114PWR Overview
The case is made of 8-TSSOP (0.173, 4.40mm Width) plastic. The Tape & Reel (TR) case is ideal for packing the part. Mounting is done along the Surface Mount-axis. The voltage is set to 2.8V~5.5V. It must not be possible for this component to operate at -40°C~85°C°C as its minimum operating temperature. The component connected to Handheld/Mobile Devices is a good match for this component. There is a Source Selector Switch category assigned to the device. The FET type can be recognized as N-Channel. 8 terminations are available in the part in order to meet your needs. Pins are positioned on 8 axes. Using TPS2114 as a basis, the part is constructed. In order to deliver its performance, it is powered by 2.8V. To run NOT SPECIFIED, we use the peak reflow temperature of this part. As far as I know, the part belongs to the Power Management Circuits family. In this part, there are 8 pins. The supply current used for its operating is 55μA. If 0.09mA is greater than 0, the supply current (Isup) should conduct. There are 1 outputs. Parts should be mounted Surface Mount-wise. It can work with voltages greater than 5.5VV as an input voltage. A voltage less than 2.8VV can be used to drive the chip. It is possible to deliver the part under a 750mA output current. As a result, 750mA is the maximum output current that can be delivered to the component. In order for this device to function, it requires a supply voltage of 5.5V.
TPS2114PWR Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : NOT SPECIFIED
1 outputs
operate supply voltage at 5.5V
TPS2114PWR Applications
There are a lot of Texas Instruments TPS2114PWR Ideal Diode controller applications.
- Building automation
- Automotive ADAS systems - camera
- Electricity meters
- Electronic point of sale
- Modems
- Automotive USB hubs
- PCs
- MP3 Players
- Asset tracker
- Digital Cameras
