TPS2115ADRBT
| Parameters | |
|---|---|
| Output Current | 1.25A |
| Max Supply Current | 90μA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - ON | 1ms |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.012046mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 150mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2.5W |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2115 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 55μA |
TPS2115ADRBT Overview
The case comes with it. As a result, it is suitable for packing the part in the Tape & Reel (TR) case. Surface Mount is the way the part is mounted. An electric current of 2.8V~5.5V is applied to it. It is not allowed for this component to operate below -40°C~85°C degrees. The component connected in Handheld/Mobile Devices is suitable for this component. It is classified as a Source Selector Switch device by the manufacturer. As far as FET types are concerned, N-Channel can be recognized. There are 8 terminations available in the part. Pins are attached to it using 8 pins. Using TPS2115 as a basis, the part is constructed. 2.8V provides its performance. In order to run 260, a part's peak reflow temperature is utilized. A Power Management Circuits family part is involved in the project. It is a part that has 8 pins in it. For the operation of this device, an electric current of 55μA is used as the supply current. 1 outputs are available in the system. Under 2A, the output current can conduct through the chip. This chip can be used with an input voltage of more than 5.5V volts without any problems. A voltage less than 2.8VV can be used to drive the chip. Deliveries can be made under 1.25A output current. The output current that can be delivered to the component is determined by the 1.25A value. There is no problem operating this device with a supply voltage of 5.5V. This part has a 2 input that allows it to run. It is important to keep the device resistance within the range of 150mOhm.
TPS2115ADRBT Features
in a 8-VDFN Exposed Pad case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2115ADRBT Applications
There are a lot of Texas Instruments TPS2115ADRBT Ideal Diode controller applications.
- Digital Cameras
- Automotive infotainment systems - head unit,telematics control unit
- PCs
- Factory automation and control - PLC digital output modules
- Active ORing for redundant power supplies
- Automotive battery protection
- Modems
- Cell phones
- Power supply reverse polarity protection
- AC Rectifier
