banner_page

TPS2115AIPWRQ1

TPS2115AIPWRQ1 datasheet pdf and PMIC - OR Controllers, Ideal Diodes product details from Texas Instruments stock available at Noco


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2115AIPWRQ1
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 868
  • Description: TPS2115AIPWRQ1 datasheet pdf and PMIC - OR Controllers, Ideal Diodes product details from Texas Instruments stock available at Noco(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 8
Weight 39.008944mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series Automotive, AEC-Q100
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Type Source Selector Switch
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Applications Handheld/Mobile Devices
Subcategory Power Management Circuits
Voltage - Supply 2.8V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.8V
Terminal Pitch 0.65mm
Base Part Number TPS2115
Pin Count 8
Number of Outputs 1
Max Output Current 1.25A
Operating Supply Voltage 5.5V
Number of Channels 1
Output Current 1.25A
Adjustable Threshold NO
Turn On Delay Time 1 ms
Current - Supply 55μA
Min Input Voltage 2.8V
FET Type N-Channel
Number of Inputs 2
Max Input Voltage 5.5V
Supply Current-Max (Isup) 0.09mA
Ratio - Input:Output 2:1
Internal Switch(s) Yes
Current - Output 2 1.25A
Delay Time - OFF 5ms
Height 1.2mm
Length 3mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2115AIPWRQ1 Overview


The case comes with it. It is suited to pack the part in Tape & Reel (TR) case. In this case, the part is mounted in the direction of Surface Mount. An electric current of 2.8V~5.5V is applied to it. It is essential that the minimal operating temperature of this component is not -40°C~85°C. The component connected in Handheld/Mobile Devices is suitable for this component. It is classified as a Source Selector Switch device by the manufacturer. There is a N-Channel type of FET. 8 terminations are available in the part in order to meet your needs. 8 pins are used in the design of this product. Using TPS2115 as a basis, the part is constructed. Powered by 2.8V, it delivers high performance. For 260, the peak reflow temperature of this part is used. Using 55μA to run part supply current. It is part of the Power Management Circuits family. In this part, there are 8 pins. There should be a current flow in the supply line (Isup) under 0.09mA. In addition, there are 1 outputs available for use. An input voltage over 5.5V V can be used with this chip. Input voltages less than 2.8V Volts are suitable for this chip, as long as the voltage input is not excessive. Under 1.25A output current, the part can be delivered. In the Automotive, AEC-Q100 series, this device is one of the most popular devices. The output current that can be delivered to the component is determined by the 1.25A value. The device can be operated with a voltage supply of 5.5V on the supply line. During the running of the part, 2 inputs must be provided.

TPS2115AIPWRQ1 Features


in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs

TPS2115AIPWRQ1 Applications


There are a lot of Texas Instruments TPS2115AIPWRQ1 Ideal Diode controller applications.

  • AC Rectifier
  • USB HUBs
  • Alternator
  • MP3 Players
  • Automotive battery protection
  • Electricity meters
  • PDAs
  • Head Unit
  • Camera ECU
  • ADAS domain controller

Write a review

Note: HTML is not translated!
    Bad           Good