banner_page

TPS2115APW

TPS2115APW datasheet pdf and PMIC - OR Controllers, Ideal Diodes product details from Texas Instruments stock available at Noco


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2115APW
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 452
  • Description: TPS2115APW datasheet pdf and PMIC - OR Controllers, Ideal Diodes product details from Texas Instruments stock available at Noco(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 8
Weight 39.008944mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Source Selector Switch
Resistance 84mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Applications Handheld/Mobile Devices
Subcategory Power Management Circuits
Max Power Dissipation 387mW
Voltage - Supply 2.8V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.8V
Terminal Pitch 0.65mm
Base Part Number TPS2115
Pin Count 8
Number of Outputs 1
Output Voltage 6V
Max Output Current 1.25A
Operating Supply Voltage 5.5V
Number of Channels 2
Output Current 1.25A
Max Supply Current 55μA
Adjustable Threshold YES
Turn On Delay Time 1 ms
Min Input Voltage 2.8V
FET Type N-Channel
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Ratio - Input:Output 2:1
Internal Switch(s) Yes
Current - Output 2 1.25A
Delay Time - OFF 5ms
Height 1.2mm
Length 3mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2115APW Overview


The case is made of 8-TSSOP (0.173, 4.40mm Width) plastic. It is suited to pack the part in Tube case. The part is mounted in the way of Surface Mount. With 2.8V~5.5V as its voltage, it is given a temperature of 0°C. In order for this component to operate properly, its minimum operating temperature must not exceed -40°C~85°C. It fits the Handheld/Mobile Devices-connected component. It is classified as a Source Selector Switch device by the manufacturer. A type of FET known as N-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. 8 terminations are available in the part in order to meet your needs. There are 8 pins on the board and it is designed with them. It is based on TPS2115. This device is powered by 2.8V in order to deliver a high level of performance. To run 260, we use the peak reflow temperature of this part. Part of the Power Management Circuits family. In the part, you will find 8 pins. The 1 outputs are available for use. Using the chip over 5.5V volts is allowed. With an input voltage less than 2.8V V, the chip can be used. Deliveries can be made under 1.25A output current. This component can deliver 1.25A output currents. When supplied with a voltage of 5.5V, this device will function. A maximum output voltage of 6V can be obtained from this device. Keeping the device resistance within 84mOhm is recommended.

TPS2115APW Features


in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V

TPS2115APW Applications


There are a lot of Texas Instruments TPS2115APW Ideal Diode controller applications.

  • PDAs
  • Automotive USB hubs
  • Automotive ADAS systems - camera
  • Active ORing for redundant power supplies
  • Active ORing for redundant power
  • USB HUBs
  • MP3 Players
  • Motor drives
  • PCs
  • Alternator

Write a review

Note: HTML is not translated!
    Bad           Good