Parameters |
Package / Case |
TSSOP |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
39.008944mg |
JESD-609 Code |
e4 |
Pbfree Code |
no |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.8V |
Terminal Pitch |
0.65mm |
Pin Count |
8 |
Number of Outputs |
1 |
Max Output Current |
1.25A |
Operating Supply Voltage |
5.5V |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
2 |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Operating Supply Current |
55μA |
Current - Output |
1.25A |
Adjustable Threshold |
YES |
Turn On Delay Time |
1 ms |
Min Input Voltage |
2.8V |
Number of Inputs |
2 |
Max Input Voltage |
5.5V |
Supply Current-Max (Isup) |
0.09mA |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
5 ms |
Current - Output 2 |
1.25A |
Height |
1.15mm |
Length |
3mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
TPS2115APWG4 Overview
This item comes in a TSSOP case. Among the options available for the part are 8 terminations. Pins are positioned on 8 axes. The performance of this device is powered by 2.8V. In order to run 260, a part's peak reflow temperature is utilized. It is part of the Power Management Circuits family. This part contains 8 pins that are located on the surface. The supply current used for its operating is 55μA. Isup (supply current) should conduct under 0.09mA. 1 outputs are available in the system. This chip can be used with an input voltage of more than 5.5V volts without any problems. Input voltages less than 2.8V Volts are suitable for this chip, as long as the voltage input is not excessive. In terms of output current, the part can be delivered under 1.25A output current. It is possible for this device to operate at a voltage of 5.5V. In order for the part to run, it has 2 inputs. In order to use the part, the temperature should be above -40°C. The part should be used when the temperature below 85°C.
TPS2115APWG4 Features
in a TSSOP case
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2115APWG4 Applications
There are a lot of Texas Instruments TPS2115APWG4 Ideal Diode controller applications.
- Modems
- Power supply reverse polarity protection
- MP3 Players
- Electricity meters
- USB HUBs
- Asset tracker
- Industrial transport
- Electronic point of sale
- Automotive USB hubs
- Active ORing for redundant power