TPS2115APWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 84mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 387mW |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2115 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Operating Supply Current | 55μA |
| Output Current | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - ON | 1ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2115APWR Overview
The case is made of 8-TSSOP (0.173, 4.40mm Width) plastic. A Tape & Reel (TR) case is a good choice for packing the part. Part Surface Mount is mounted. The voltage is set to 2.8V~5.5V. A minimum operating temperature of -40°C~85°C must not be reached by this component. It fits perfectly with the component connected to Handheld/Mobile Devices. The device is categorized as Source Selector Switch. There is a N-Channel type of FET. The part comes with 8 terminations. 8 pins are used in the design of this product. It is based on TPS2115. Performance is delivered by 2.8V. Run 260 using this part's peak reflow temperature. A Power Management Circuits family part is involved in the project. In the part, you will find 8 pins. 55μA is the supply current that is used for the operation of the device. In order to conduct under 0.09mA, the supply current (Isup) should be conducted. A 1 output is available on the board. The chip can be used with an input voltage of more than 5.5V V. With an input voltage less than 2.8V V, the chip can be used. Under 1.25A output current, the part can be delivered. There is a specific output current that can be delivered to the component, which is called 1.25A. There is no problem operating this device with a supply voltage of 5.5V. For this part to run, 2 inputs are required. A maximum output voltage of 6V can be obtained from this device. Keeping the device resistance within 84mOhm is recommended.
TPS2115APWR Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2115APWR Applications
There are a lot of Texas Instruments TPS2115APWR Ideal Diode controller applications.
- Cell phones
- Asset tracker
- Active ORing for redundant power
- Motor drives
- MP3 Players
- AC Rectifier
- Automotive USB hubs
- Active OR-ing of Redundant (N+1) Power Supplies
- Automotive battery protection
- Factory automation and control - PLC digital output modules
