TPS2115APWRG4
| Parameters | |
|---|---|
| Current - Output 2 | 1.25A |
| Delay Time - OFF | 5ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2115 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Output Current | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Current - Supply | 55μA |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
TPS2115APWRG4 Overview
The case that it comes in is called 8-TSSOP (0.173, 4.40mm Width) case. It is suited to pack the part in Tape & Reel (TR) case. The part is mounted in the way of Surface Mount. There is a voltage of 2.8V~5.5V applied to it. It is essential that the minimal operating temperature of this component is not -40°C~85°C. It fits the Handheld/Mobile Devices-connected component. Device Source Selector Switch belongs to the Source Selector Switch category. A N-Channel-type FET can be identified. In this part, there are 8 terminations. 8 pins are used in the design of this product. TPS2115 underpins the part. Powered by 2.8V, it is capable of delivering its performance to its customers. Run 260 using this part's peak reflow temperature. It is necessary to run the supply current at 55μA for the part. It is part of the Power Management Circuits family. Among the pins on the part are 8 pins. In order to conduct under 0.09mA, the supply current (Isup) should be conducted. Outputs with 1 are available. It can work with voltages greater than 5.5VV as an input voltage. There are only a few chips on the market that can be used with an input voltage lower than 2.8V volts. Parts can be delivered with 1.25A output current. The component can be delivered a current of 1.25A as an output. It is possible for this device to operate at a voltage of 5.5V. A 2 input is required to run the part.
TPS2115APWRG4 Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2115APWRG4 Applications
There are a lot of Texas Instruments TPS2115APWRG4 Ideal Diode controller applications.
- Industrial motor drives
- Automotive battery protection
- PDAs
- Digital Radios
- Motor drives
- AC Rectifier
- MP3 Players
- ADAS domain controller
- Asset tracker
- Industrial transport
