TPS2115PWG4
| Parameters | |
|---|---|
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 55μA |
| Current - Output | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Min Input Voltage | 2.8V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 ms |
| Current - Output 2 | 1.25A |
| Height | 1.15mm |
| Length | 3mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS2115PWG4 Overview
It comes in TSSOP case. 8 terminations are available in the part in order to meet your needs. Pins are attached to it using 8 pins. This device is powered by 2.8V in order to deliver a high level of performance. For the purpose of running 260, this part's peak reflow temperature is utilized. Part of the Power Management Circuits family. Among the pins on the part are 8 pins. In order for it to operate, a supply current of 55μA is used. There should be a current flow in the supply line (Isup) under 0.09mA. As part of the outputs, there is a 1 output. An input voltage of more than 5.5V V can be used with the chip. The chip can be used with an input voltage of less than 2.8V V. Delivery of the part is possible under 1.25A output current. Using 5.5V as the supply voltage, this device can be operated. In order to make the part run, there are 2 inputs. If the temperature exceeds -40°C, use the part. It is recommended to use the part when the temperature falls below 85°C.
TPS2115PWG4 Features
in a TSSOP case
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2115PWG4 Applications
There are a lot of Texas Instruments TPS2115PWG4 Ideal Diode controller applications.
- Modems
- Camera ECU
- PCs
- Automotive battery protection
- MP3 Players
- Active OR-ing of Redundant (N+1) Power Supplies
- Automotive infotainment systems - head unit,telematics control unit
- Active ORing for redundant power
- Asset tracker
- Automotive ADAS systems - camera
