TPS2115PWR
| Parameters | |
|---|---|
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Current - Supply | 55μA |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - OFF | 5ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2115 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Output Current | 1.25A |
TPS2115PWR Overview
The case that it comes in is called 8-TSSOP (0.173, 4.40mm Width) case. In Tape & Reel (TR) cases, it is convenient to pack the part. Part Surface Mount is mounted. There is a voltage of 2.8V~5.5V applied to it. A minimum operating temperature of -40°C~85°C must not be reached by this component. It fits perfectly with the component connected to Handheld/Mobile Devices. It is classified as a Source Selector Switch device by the manufacturer. In the case of FETs, N-Channel is recognized as the type. 8 terminations are available in the part. In this case, 8 pins have been used to design it. TPS2115 is the base of this part. In order to deliver its performance, it is powered by 2.8V. The peak reflow temperature of this part is used to run 260 on it. In order to run the supply current for the part at 55μA. A Power Management Circuits family part is involved in the project. This part contains 8 pins that are located on the surface. In order to conduct under 0.09mA, the supply current (Isup) should be conducted. As part of the outputs, there is a 1 output. The chip can be used with an input voltage of more than 5.5V V. It is possible to use the chip if the input voltage is less than 2.8V Volts. The part can be delivered under 1.25A output current. There is a specific output current that can be delivered to the component, which is called 1.25A. It is possible to operate this device with a supply voltage of 5.5V. For this part to run, 2 inputs are required.
TPS2115PWR Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2115PWR Applications
There are a lot of Texas Instruments TPS2115PWR Ideal Diode controller applications.
- Automotive battery protection
- Camera ECU
- Electronic point of sale
- Digital Cameras
- MP3 Players
- Automotive infotainment systems - head unit,telematics control unit
- Industrial transport
- Head Unit
- Industrial motor drives
- Active ORing for redundant power supplies
