TPS2149IDGN
| Parameters | |
|---|---|
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 1.4555W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2149 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 150mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Output Voltage 1 | 3.3V |
| Switch Type | USB Switch |
| Min Input Voltage | 2.9V |
| Max Input Voltage | 5.5V |
| Regulator Type | FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR |
| Ratio - Input:Output | 1:2 |
| Voltage Tolerance-Max | 3% |
| Voltage - Load | 2.9V~5.5V |
| Min Current Limit | 200mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Input Voltage Absolute-Max | 6V |
| Rds On (Typ) | 340m Ω |
| Output Voltage 2 | 3.3V |
| Height | 1.1mm |
| Length | 3mm |
TPS2149IDGN Overview
Tube is the way it's packaged.In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, it is included.The LED driver is mounted as Surface Mount.It owns USB Switch switch type.The temperature should be set to -40°C~100°C TJ to ensure reliable functioning.It is possible to use 2 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.In terms of features, the LED driving board has Status Flag.It is a member of the TPS2149 family.A total of 8 terminations have been found in it.8 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.A total of 8 pins are included in this LED driver.When this is the case, the output current is set to 150mA.This LED driver can handle voltages up to 5.5V volts.There is a minimum input voltage of 2.9V volts.
TPS2149IDGN Features
TPS2149IDGN Applications
There are a lot of Texas Instruments TPS2149IDGN Power Switches ICs applications.
- Portable Video Game Players
- PDAs
- HDD and SSD
- Portable Music Players
- Hot Swap
- Hot Swap
- Hard Disk Drives
- Hot-Swap Systems
- Wireless Headsets
- USB Protection
