TPS2158IDGN
| Parameters | |
|---|---|
| Output Current | 150mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Output Voltage 1 | 3.3V |
| Switch Type | USB Switch |
| Min Input Voltage | 2.9V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Regulator Type | FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR |
| Ratio - Input:Output | 1:2 |
| Voltage Tolerance-Max | 3% |
| Voltage - Load | 2.9V~5.5V |
| Min Current Limit | 200mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Input Voltage Absolute-Max | 6V |
| Rds On (Typ) | 340m Ω |
| Output Voltage 2 | 3.3V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 340mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 1.455W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2158 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Interface | On/Off |
| Output Configuration | High Side |
TPS2158IDGN Overview
It is package in Tube case.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package includes it.Surface Mount is the mounting type of the LED driver.This switch is of type USB Switch.It is recommended that the temperature be set to -40°C~100°C TJ for reliable performance.In this LED driver, there are no outputs available.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage of this LED driver is N-Channel volts.I believe it belongs to the TPS2158 family.It consists of 8 terminations in total.It is necessary to use the 8 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.To meet the operation criteria, the maximum output current drops to 150mA.8 pins are equipped with it.It has a resistance of 340mOhm.The output current is set to 150mA in this case.As far as input voltage goes, its maximum is 5.5V volts.It has a 2.9V volt minimum input voltage.
TPS2158IDGN Features
Resistance of 340mOhm
TPS2158IDGN Applications
There are a lot of Texas Instruments TPS2158IDGN Power Switches ICs applications.
- Portable GPS Device
- Notebook PC
- Hot Swaps
- Portable Music Players
- USB Power Distribution
- USB Power Distribution
- PDAs
- Mobile Communication Devices
- USB Ports/Hubs
- Telecom and Network Systems
