TPS2201IDBR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 30-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 30 |
| Weight | 217.61094mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Power Good, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Resistance | 225mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2201 |
| Pin Count | 30 |
| Number of Outputs | 4 |
| Max Output Current | 1A |
| Power Supplies | 5V |
| Number of Channels | 3 |
| Interface | Parallel |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 2 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Supply Current-Max (Isup) | 0.15mA |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 160m Ω (Max) |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2201IDBR Overview
It is packaged in the form of a Tape & Reel (TR).This file is included in package 30-SSOP (0.209, 5.30mm Width).The lighting driver is mounted in the Surface Mount position.The switch type of this switch is PCMCIA Switch.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The lighting driver has a total of 4 outputs that are available for use.The LED driving board operates with a supply voltage of 4.75V~5.25V.It is equipped with Power Good, Status Flag features.It is a member of the TPS2201 family.A total of 30 terminations can be found in it.During operation, the 30 pins are used.As far as functions are concerned, the lighting driver has 1.The maximum output current drops to 1A in order to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 5V.The LED driving board is equipped with a total of 30 pins.In this LED driving board, there is 225mOhm resistance.A self-contained econtainer holding Power Management Circuits capacity contains this lighting driver.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 3 channels.In this part, the power supply is set to 5V.Its maximum supply current for operation is 0.15mA.
TPS2201IDBR Features
Supplied from 5V
Resistance of 225mOhm
3 channels
TPS2201IDBR Applications
There are a lot of Texas Instruments TPS2201IDBR Power Switches ICs applications.
- Wireless Modem Data Cards
- Hot Swap
- PC Cards
- USB3.1 Power Delivery
- Set-Top Boxes
- Solid State Drivers
- Hot Swaps
- Set-top-box
- Storage (HDDs, SSDs)
- PC Card Hot Swap
