TPS2201IDFR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 30 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Power Good, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Resistance | 225mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Base Part Number | TPS2201 |
| Pin Count | 30 |
| Number of Outputs | 4 |
| Power Supplies | 5V |
| Number of Channels | 3 |
| Interface | Parallel |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Number of Ports | 2 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Supply Current-Max (Isup) | 0.15mA |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 160m Ω (Max) |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.55mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS2201IDFR Overview
It is package in Cut Tape (CT) case.This file is included in package 30-SSOP (0.209, 5.30mm Width).The lighting driver has the mounting type Surface Mount.PCMCIA Switch is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 4 outputs that can be used.It uses a supply voltage of 4.75V~5.25V to operate.There are Power Good, Status Flag features available on the LED driving board.The TPS2201 family contains this object.As a result, there are 30 terminations.In order to operate, 30 pins are used.The LED driver has 1 functions.In terms of output, the lighting driver can provide a maximum of 1A V.Using a voltage of 5V allows for high efficiency.This lighting driver is mounted in the way of Surface Mount.The LED driver has a total of 30 pins.Currently, the LED driving board has a resistance of 225mOhm ohms.This LED driver is self-contained in an econtainer with a capacity of Power Management Circuits.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 3 channels available.It has a power supply of 5V.For operation, it has a maximum supply current of 0.15mA.
TPS2201IDFR Features
Supplied from 5V
Resistance of 225mOhm
3 channels
TPS2201IDFR Applications
There are a lot of Texas Instruments TPS2201IDFR Power Switches ICs applications.
- USB Power Distribution
- Hot-Swap Systems
- PC Card Hot Swap
- Portable GPS Device
- Portable Music Players
- Wireless/Networking Cards
- PDAs
- USB Protection
- Wearable Devices
- Telecom and Network Systems
