TPS2202AIDBR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 30 |
| Weight | 217.61094mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Power Good, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Resistance | 225mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2202 |
| Pin Count | 30 |
| Number of Outputs | 4 |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Supply Current-Max (Isup) | 0.15mA |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 160m Ω (Max) |
| Height | 1.95mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2202AIDBR Overview
The LED driver's packaged as a Tape & Reel (TR).The 30-SSOP (0.209, 5.30mm Width) package includes it.It has been mounted as Surface Mount on the LED driver.PCMCIA Switch is the switch type it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver has 4 outputs.A voltage of 4.75V~5.25V is used to power it.In terms of features, the LED driving board has Power Good, Status Flag.As you can see, it comes from the TPS2202 family.As a result, there are 30 terminations.30 pins are used for operation.There are 1 functions of the LED driver.The maximum output current drops to 1A in order to meet the operation criteria.The supply voltage can be 5V for high efficiency.This lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 30 pins.Lighting drivers with 225mOhm resistance are used.A self-contained container with a capacity of Power Management Circuits contains this lighting driver.The maximum supply voltage for this LED driver is 5.25V (Vsup).This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.We currently have 2 channels available.This part has a power supply of 5V volts.The maximum supply current for the LED driver is 0.15mA when it is operating.
TPS2202AIDBR Features
Supplied from 5V
Resistance of 225mOhm
2 channels
TPS2202AIDBR Applications
There are a lot of Texas Instruments TPS2202AIDBR Power Switches ICs applications.
- Wireless Headsets
- Various applications equipped with buttons
- Notebook and Tablet Computers
- Portable/Handheld Devices
- USB Power Distribution
- PDAs
- Hard Disk Drives
- Hot-Swap Systems
- Wireless Modem Data Cards
- HDD, SSD
