TPS2204APWP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2.491W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2204 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Voltage | 14V |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 2.491W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Min Input Voltage | 3.3V |
| Max Input Voltage | 12V |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 1.15mm |
| Length | 7.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2204APWP Overview
It is packaged in the form of a Tube.There is a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package that includes it.The LED driver is mounted as Surface Mount.The switch type is PCMCIA Switch.To ensure reliable operation, set the temperature to -40°C~85°C TA.It is possible to use 4 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.Features of the lighting driver are Status Flag.As you can see, it comes from the TPS2204 family.A total of 24 terminations have been found in it.The 24 pins are used for the operation of the system.It has 1 functions.The maximum output current must drop to 1A to meet the operation criteria.A supply voltage of 3.3V leads to high efficiency.The lighting driver is mounted in the direction of Surface Mount.A total of 24 pins are included in this LED driver.Lighting drivers with 85mOhm resistance are used.A self-contained container with a capacity of Power Management Circuits contains this lighting driver.The Vsup value (maximum supply voltage) is set to 3.6V.In order to operate normally, the supply voltage (Vsup) must be maintained above 3V.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.A total of 3 channels are available for you to choose from.The maximum input voltage is 12V volts.A minimum input voltage of 3.3V volts is required for this LED driver.ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V can also be produced by using this LED driver.
TPS2204APWP Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V
TPS2204APWP Applications
There are a lot of Texas Instruments TPS2204APWP Power Switches ICs applications.
- Portable GPS
- Gaming
- PC Cards
- PC Card Hot Swap
- Various applications equipped with buttons
- Wearable Devices
- Portable Video Game Players
- Hard Disk Drives
- PDAs
- Set-top-box
