TPS2204APWPR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2204 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3512V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2204APWPR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included with the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package as well.The LED driver is mounted as Surface Mount.PCMCIA Switch is the switch type that it owns.Keeping the temperature at -40°C~85°C TA ensures reliable operation.By default, it is set to output 4.Operation is based on a supply voltage of Not Required.In terms of features, the LED driving board has Status Flag.It is part of the TPS2204 family of LED drivers.There are 24 terminations in it.The 24 pins are used for the operation of the system.Currently, the lighting driver has a total of 1 functions.This lighting driver is capable of delivering a maximum output of 1A volts.It is possible to obtain high efficiency with a supply voltage of 3.3V.The LED driving board is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 24 pins.A self-contained econtainer holding Power Management Circuits capacity contains this lighting driver.This LED driver is configured to have a maximum supply voltage of 3.6V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 3V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 3 channels.This part's power supply is 3.3512V.By using this lighting driver, it is also possible to produce ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V.
TPS2204APWPR Features
Supplied from 3.3V
3 channels
Additional features like ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V
TPS2204APWPR Applications
There are a lot of Texas Instruments TPS2204APWPR Power Switches ICs applications.
- Set-top-box
- Storage (HDDs, SSDs)
- Solid-State Drives
- Hard Disk Drives
- USB Protection
- USB Power Distribution
- Hot Swap
- Solid State Drivers
- Mobile Communication Devices
- Wireless Headsets
