TPS2204APWPRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2204 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3512V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2204APWPRG4 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included with the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package as well.The mounting type of the LED driver is Surface Mount.It owns PCMCIA Switch switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 4 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.Features of the lighting driver are Status Flag.It belongs to the TPS2204 family.A total of 24 terminations have been found in it.For operation, we use the 24 pins.It has 1 functions.1AV is the maximum output of the LED driver.High efficiency is possible when the supply voltage is set to 3.3V.The lighting driver is mounted in the direction of Surface Mount.As a result, it has a total of 24 pins.It is self-contained in an econtainer with a capacity of Power Management Circuits.The LED driver is configured with a maximum supply voltage of 3.6V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.You can select from 3 channels.In this case, the power supply is 3.3512V.By using this lighting driver, it is also possible to produce ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V.
TPS2204APWPRG4 Features
Supplied from 3.3V
3 channels
Additional features like ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V
TPS2204APWPRG4 Applications
There are a lot of Texas Instruments TPS2204APWPRG4 Power Switches ICs applications.
- Smartphone and PDA
- Portable Video Game Players
- Storage (HDDs, SSDs)
- Hard Disk Drives
- Portable Music Players
- Wireless Headsets
- Notebook PC
- Hot-Swap Systems
- PDAs
- Wireless/Networking Cards
