TPS2205IDBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 30 |
| Weight | 217.61094mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2205 |
| Pin Count | 30 |
| Number of Outputs | 4 |
| Max Output Current | 1A |
| Power Supplies | 5V |
| Number of Channels | 3 |
| Interface | Parallel |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 2 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 103m Ω |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2205IDBR Overview
A Cut Tape (CT) is used to package it.Package 30-SSOP (0.209, 5.30mm Width) contains it.The LED driver is mounted as Surface Mount.It owns the PCMCIA Switch switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.This LED driving board is equipped with Status Flag features in order for it to be useful.It is part of the TPS2205 family of LED drivers.It has a total of 30 terminations.The 30 pins are used to operate the LED driver.As far as functions are concerned, the lighting driver has 1.This results in the maximum output current dropping to 1A to meet the operation criteria.High efficiency is possible at 3.3V supply voltage.Surface Mount is mounted in the way of this LED driving board.30 pins are connected to it in total.In this LED driving board, there is 110mOhm resistance.Self-contained LED driver with Power Management Circuits capacity in an econtainer.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.You can select from 3 channels.There is a voltage supply of 5V volts on this part.
TPS2205IDBR Features
Supplied from 3.3V
Resistance of 110mOhm
3 channels
TPS2205IDBR Applications
There are a lot of Texas Instruments TPS2205IDBR Power Switches ICs applications.
- Wearable Devices
- Gaming
- Set-Top Boxes
- Solid State Drivers
- Portable Music Players
- PC Card Hot Swap
- Solid-State Drives
- Wireless Headsets
- Hard Disk Drives
- USB Protection
