TPS2206ADAP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 3.191W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2206 |
| Pin Count | 32 |
| Number of Outputs | 4 |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3512V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 3.191W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Max Input Voltage | 13.5V |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 1.15mm |
| Length | 11mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2206ADAP Overview
The LED driver's packaged as a Tube.The 32-PowerTSSOP (0.240, 6.10mm Width) package includes it.In this case, the LED driving board is mounted as Surface Mount.A PCMCIA Switch switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 4 outputs.A supply voltage of Not Required is required for it to operate.It has a total of Status Flag features.It is part of the TPS2206 family of LED drivers.There are 32 terminations in it.In order to operate, 32 pins are used.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 1A in order to meet the operation requirements.The supply voltage of 3.3V is conducive to high efficiency.Surface Mount is mounted in the way.This LED driver is equipped with a total of 32 pins.Currently, the LED driving board has a resistance of 85mOhm ohms.Self-contained LED driver with Power Management Circuits capacity in an econtainer.The lighting driver is configured to have a maximum supply voltage of 3.6V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 3V.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 3 channels available.This part is powered by 3.3512V.A maximum input voltage of 13.5V volts can be applied to it.As well as producing ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V, this LED driving board is capable of producing [1].
TPS2206ADAP Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V
TPS2206ADAP Applications
There are a lot of Texas Instruments TPS2206ADAP Power Switches ICs applications.
- Set-Top Boxes
- USB3.1 Power Delivery
- Portable Music Players
- Smartphone and PDA
- Notebook and Tablet Computers
- Storage (HDDs, SSDs)
- USB Protection
- USB Ports/Hubs
- Mobile Communication Devices
- Hard Disk Drives
