TPS2206ADAPR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2206 |
| Pin Count | 32 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3512V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height Seated (Max) | 1.2mm |
| Length | 11mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2206ADAPR Overview
It is packaged in the manner of a Tape & Reel (TR).In the 32-PowerTSSOP (0.240, 6.10mm Width) package, it is included.This LED driving board is mounted using the mounting type Surface Mount.It owns the PCMCIA Switch switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.There is a default setting of 4 for output.Operation is based on a supply voltage of Not Required.It has a total of Status Flag features.It is part of the TPS2206 family of LED drivers.It consists of 32 terminations in total.The 32 pins are used for the operation of the system.It contains 1 functions.From the lighting driver, there is a maximum output of 1AV.The supply voltage of 3.3V is conducive to high efficiency.It is mounted in the way of Surface Mount.A total of 32 pins are included in this LED driver.A self-contained container with a capacity of Power Management Circuits contains this lighting driver.The LED driver is configured with a maximum supply voltage of 3.6V (Vsup).Normal operation requires a voltage above 3V for the supply voltage.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 3 channels available.There is a voltage supply of 3.3512V volts on this part.As a result of using this lighting driver, ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V can also be produced.
TPS2206ADAPR Features
Supplied from 3.3V
3 channels
Additional features like ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V
TPS2206ADAPR Applications
There are a lot of Texas Instruments TPS2206ADAPR Power Switches ICs applications.
- Portable Music Players
- Hard Disk Drives
- Hot Swaps
- PDAs
- USB Protection
- Wireless Headsets
- Portable Video Game Players
- Solid State Drivers
- USB Ports/Hubs
- Solid-State Drives
