TPS2206ADAPRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2206 |
| Pin Count | 32 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3512V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height Seated (Max) | 1.2mm |
| Length | 11mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2206ADAPRG4 Overview
A Tape & Reel (TR) is used to package it.It's included in the 32-PowerTSSOP (0.240, 6.10mm Width) package.The mounting type of the LED driver is Surface Mount.It owns the PCMCIA Switch switch type.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.By default, it is set to output 4.It uses a supply voltage of Not Required to operate.Status Flag features are available on the lighting driver.It is a member of the TPS2206 family.It has a total of 32 terminations.The 32 pins are used for the operation of the system.The LED driving board has a total of 1 functions.This LED driver has a maximum output of 1AV.The supply voltage of 3.3V is conducive to high efficiency.It is positioned in the direction of Surface Mount.In total, it has 32 pins.A container with a capacity of Power Management Circuits contains this self-contained lighting driver.The Vsup value (maximum supply voltage) is set to 3.6V.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 3 channels to choose from.It has a power supply of 3.3512V.With this LED driver, ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V can also be produced.
TPS2206ADAPRG4 Features
Supplied from 3.3V
3 channels
Additional features like ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V
TPS2206ADAPRG4 Applications
There are a lot of Texas Instruments TPS2206ADAPRG4 Power Switches ICs applications.
- Solid-State Drives
- Telecom and Network Systems
- Gaming
- Storage Drives
- Portable Music Players
- Hot Swap
- Portable GPS Device
- Solid State Drivers
- Wireless Modem Data Cards
- Hot-Swap Systems
