TPS2206ADB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 30 |
| Weight | 217.61094mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2206 |
| Pin Count | 30 |
| Number of Outputs | 4 |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 2 |
| Nominal Supply Current | 140μA |
| Output Configuration | High Side |
| Power Dissipation | 821.46mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2206ADB Overview
As a result, it is packaged in the form of a Tube.It is included in the package 30-SSOP (0.209, 5.30mm Width).This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of PCMCIA Switch.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.A lighting driver with Status Flag features is available.The TPS2206 family consists of this type.A total of 30 terminations have been recorded.The 30 pins are used to operate the LED driver.It consists of 1 functions.This results in the maximum output current dropping to 1A to meet the operation criteria.With a supply voltage of 3.3V, high efficiency is possible.It is positioned in the direction of Surface Mount.This LED driver is equipped with a total of 30 pins.In this LED driving board, there is 85mOhm resistance.Self-contained LED driver with Power Management Circuits capacity in an econtainer.In this case, Vsup (maximum supply voltage) is set to 3.6V.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 3 channels available.In addition, ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V can be produced using this LED driving board.
TPS2206ADB Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V
TPS2206ADB Applications
There are a lot of Texas Instruments TPS2206ADB Power Switches ICs applications.
- Telecom and Network Systems
- Wearable Devices
- Set-top-box
- Portable GPS Device
- Portable/Handheld Devices
- Notebook and Tablet Computers
- Set-Top Boxes
- Hot Swap
- Portable GPS
- Portable Devices
