TPS2206ADBR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 30 |
| Weight | 217.61094mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2206 |
| Pin Count | 30 |
| Number of Outputs | 4 |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 2 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 95m Ω |
| Height | 1.95mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2206ADBR Overview
It is package in Tape & Reel (TR) case.It's included in the 30-SSOP (0.209, 5.30mm Width) package.Surface Mount is the mounting type of the LED driver.It owns the PCMCIA Switch switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The lighting driver is equipped with 4 outputs that can be used.Operation is based on a supply voltage of Not Required.This LED driving board is equipped with Status Flag features in order for it to be useful.I believe it belongs to the TPS2206 family.As a result, there are 30 terminations.The 30 pins are used to operate the LED driver.It consists of 1 functions.This operation requires the maximum output current to be decreased to 1A.High efficiency is possible when the supply voltage is set to 3.3V.The LED driving board is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 30 pins.85mOhm is the resistance of the lighting driver.This LED driver is self-contained in an econtainer with a capacity of Power Management Circuits.This LED driver is configured to have a maximum supply voltage of 3.6V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 3V.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.You can select from 3 channels.This LED driver can also produce ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V.
TPS2206ADBR Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V
TPS2206ADBR Applications
There are a lot of Texas Instruments TPS2206ADBR Power Switches ICs applications.
- Portable/Handheld Devices
- Portable GPS Device
- Wireless Modem Data Cards
- Telecom and Network Systems
- Gaming
- Various applications equipped with buttons
- Hot-Swap Systems
- Storage (HDDs, SSDs)
- Storage Drives
- Wearable Devices
