TPS2206IDAP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRE 5V AND 12V |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2206 |
| Pin Count | 32 |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3512V |
| Number of Channels | 2 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 103m Ω |
| Height | 1.15mm |
| Length | 11mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2206IDAP Overview
As you can see, it's packaged in the way of a Tube.It's included in the 32-PowerTSSOP (0.240, 6.10mm Width) package.Mounting type Surface Mount is selected for the LED driving board.A PCMCIA Switch switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 4 outputs that are available for use.The LED driving board is powered by a voltage of Not Required.Currently, the LED driving board is equipped with Status Flag features.It belongs to the family TPS2206.It has a total of 32 terminations.The operation is carried out using the 32 pins.It contains 1 functions.The LED driver output is limited to 1AV.Supply voltages of 3.3V allow for high efficiency.In this case, it is mounted in the way of Surface Mount.As a result, it has a total of 32 pins.In this LED driving board, there is 110mOhm resistance.A self-contained container with a capacity of Power Management Circuits contains this lighting driver.The maximum supply voltage for this lighting driver is set to 5.25V (Vsup).It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.In total, 2 channels are available.This part has a power supply of 3.3512V.The LED driver can also be used to produce ALSO REQUIRE 5V AND 12V.
TPS2206IDAP Features
Supplied from 3.3V
Resistance of 110mOhm
2 channels
Additional features like ALSO REQUIRE 5V AND 12V
TPS2206IDAP Applications
There are a lot of Texas Instruments TPS2206IDAP Power Switches ICs applications.
- Hard Disk Drives
- Portable Music Players
- Portable GPS Device
- Storage (HDDs, SSDs)
- Portable Devices
- Mobile Communication Devices
- Set-top-box
- Solid-State Drives
- Wearable Devices
- Portable GPS
