TPS2206IDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 30 |
| Weight | 217.61094mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Power Rating | 1.024W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2206 |
| Pin Count | 30 |
| Number of Outputs | 4 |
| Max Output Current | 1A |
| Operating Supply Voltage | 12V |
| Number of Channels | 2 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 2 |
| Nominal Supply Current | 117μA |
| Output Configuration | High Side |
| Power Dissipation | 1.024W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 103m Ω |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2206IDB Overview
As you can see, it's packaged in the way of a Tube.It is included with the 30-SSOP (0.209, 5.30mm Width) package as well.The lighting driver is mounted in the Surface Mount position.It owns PCMCIA Switch switch type.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver has a total of 4 outputs.With a supply voltage of Not Required, the LED driving board operates.Status Flag features are available on the lighting driver.It is part of the TPS2206 family of LED drivers.A total of 30 terminations can be found in it.In order to operate, 30 pins are used.As far as the lighting driver is concerned, there are 1 functions.This operation requires the maximum output current to be decreased to 1A.Using a voltage of 3.3V allows for high efficiency.In this case, it is mounted in the way of Surface Mount.In total, it has 30 pins.Lighting drivers with 110mOhm resistance are used.The LED driver is self-contained in an econtainer with Power Management Circuits capacity.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.A total of 2 channels are available for you to choose from.The supply voltage should be set at 12V for best efficiency.
TPS2206IDB Features
Supplied from 3.3V
Resistance of 110mOhm
2 channels
TPS2206IDB Applications
There are a lot of Texas Instruments TPS2206IDB Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Hard Disk Drives
- Smartphone and PDA
- Gaming
- Handheld Devices
- Portable GPS
- USB3.1 Power Delivery
- Mobile Communication Devices
- HDD and SSD
- USB Power Distribution
