TPS2206IDFR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 30 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Base Part Number | TPS2206 |
| Pin Count | 30 |
| Number of Outputs | 4 |
| Number of Channels | 2 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1A |
| Number of Ports | 2 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 3.3V 5V 12V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 103m Ω |
| Height | 1.95mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.55mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS2206IDFR Overview
Cut Tape (CT) is the way it's packaged.There is a 30-SSOP (0.209, 5.30mm Width) package that includes it.Surface Mount is the mounting type of the LED driver.This switch is of type PCMCIA Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 4 outputs that can be used.The LED driving board operates with a supply voltage of Not Required.Features of the lighting driver are Status Flag.There is a TPS2206 family of things that it belongs to.As a result, there are 30 terminations.It is necessary to use the 30 pins in order to operate the LED driver.The LED driver has 1 functions.The maximum output of the LED driving board is 1AV.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.Surface Mount is mounted in the way.The LED driver has a total of 30 pins.The LED driver has 110mOhm resistance.The LED driver is self-contained in an econtainer with Power Management Circuits capacity.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 2 channels available.
TPS2206IDFR Features
Supplied from 3.3V
Resistance of 110mOhm
2 channels
TPS2206IDFR Applications
There are a lot of Texas Instruments TPS2206IDFR Power Switches ICs applications.
- Handheld Devices
- Solid-State Drives
- Portable Music Players
- PC Card Hot Swap
- Various applications equipped with buttons
- Gaming
- USB Ports/Hubs
- Solid State Drivers
- PDAs
- Portable Video Game Players
