TPS2211AIDBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Additional Feature | ALSO OPERATE ON 5V SUPPLY |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2211 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Max Output Current | 1A |
| Number of Channels | 3 |
| Interface | Parallel |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 1 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Min Input Voltage | 3.3V |
| Max Input Voltage | 12V |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:2 |
| Voltage - Load | 3.3V 5V 12V |
| Min Current Limit | 1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 70m Ω |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2211AIDBR Overview
A Cut Tape (CT) is used to package it.There is a package for it in the 16-SSOP (0.209, 5.30mm Width) package.Mounting type Surface Mount is selected for the LED driving board.This switch is of type PCMCIA Switch.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.In terms of features, the LED driving board has Status Flag.It belongs to the TPS2211 family.In total, there are 16 terminations.The operation is performed through the 16 pins.As far as the lighting driver is concerned, there are 1 functions.This operation requires the maximum output current to be decreased to 1A.Using a voltage of 3.3V allows for high efficiency.16 pins are equipped with it.Currently, the LED driving board has 70mOhm resistance.This LED driver is self-contained in an econtainer with a capacity of Power Management Circuits.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.You can select from 3 channels.As far as input voltage goes, its maximum is 12V volts.It requires 3.3V volts as the minimum input voltage.Through the use of this lighting driver, we can also produce ALSO OPERATE ON 5V SUPPLY.
TPS2211AIDBR Features
Supplied from 3.3V
Resistance of 70mOhm
3 channels
Additional features like ALSO OPERATE ON 5V SUPPLY
TPS2211AIDBR Applications
There are a lot of Texas Instruments TPS2211AIDBR Power Switches ICs applications.
- USB Power Distribution
- Hot Swaps
- Set-Top Boxes
- Portable Devices
- USB Power Distribution
- Notebook and Tablet Computers
- Solid-State Drives
- Set-top-box
- Hard Disk Drives
- Hot-Swap Systems
