TPS2211IDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2211 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Max Output Current | 1A |
| Number of Channels | 2 |
| Interface | Parallel |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 1 |
| Output Configuration | High Side |
| Power Dissipation | 775mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Min Input Voltage | 3.3V |
| Max Input Voltage | 12V |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:2 |
| Voltage - Load | 3.3V 5V 12V |
| Min Current Limit | 1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 50m Ω |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2211IDB Overview
Tube is the way it's packaged.There is a package for it in the 16-SSOP (0.209, 5.30mm Width) package.The lighting driver is mounted in the Surface Mount position.There is a PCMCIA Switch switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.It is possible to use 2 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.Currently, the LED driving board is equipped with Status Flag features.I believe it belongs to the TPS2211 family.In total, there are 16 terminations.The operation is performed through the 16 pins.It contains 1 functions.The maximum output current is reduced to 1A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.There are 16 pins in total on this board.50mOhm resistance is present in the lighting driver.A self-contained econtainer holding Power Management Circuits capacity contains this lighting driver.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.You can select from 2 channels.Input voltage is limited to 12V volts.A voltage of 3.3V volts is the minimum input voltage.
TPS2211IDB Features
Supplied from 3.3V
Resistance of 50mOhm
2 channels
TPS2211IDB Applications
There are a lot of Texas Instruments TPS2211IDB Power Switches ICs applications.
- Portable Devices
- Set-top-box
- Wireless Modem Data Cards
- Smart Phones, Feature Phones
- HDD, SSD
- Telecom and Network Systems
- USB Protection
- PC Card Hot Swap
- Hot-Swap Systems
- USB Power Distribution
