TPS2211IDBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2211 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Number of Channels | 2 |
| Interface | Parallel |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 1 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Supply Current-Max (Isup) | 0.043mA |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:2 |
| Voltage - Load | 3.3V 5V 12V |
| Min Current Limit | 1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 50m Ω |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2211IDBR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package 16-SSOP (0.209, 5.30mm Width).The lighting driver has the mounting type Surface Mount.There is a PCMCIA Switch switch type associated with it.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The lighting driver is equipped with 2 outputs that can be used.To operate, it needs a supply voltage of Not Required.It is equipped with Status Flag features.It is part of the TPS2211 family of LED drivers.A total of 16 terminations have been recorded.It is necessary to use the 16 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.Supply voltages of 3.3V allow for high efficiency.As a result, it has a total of 16 pins.The LED driver has 50mOhm resistance.Self-contained in an econtainer with a capacity of Power Management Circuits, this LED driver is self-contained.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels to choose from.Its maximum supply current for operation is 0.043mA.
TPS2211IDBR Features
Supplied from 3.3V
Resistance of 50mOhm
2 channels
TPS2211IDBR Applications
There are a lot of Texas Instruments TPS2211IDBR Power Switches ICs applications.
- HDD and SSD
- Hot Swap
- USB Power Distribution
- Set-top-box
- Hard Disk Drives
- Notebook and Tablet Computers
- Wearable Devices
- Notebook PC
- Low Voltage I/O System Power
- Gaming
